08 · Whitby, Durham Region

Basement underpinning in Whitby

Subdivision lots take a crane and a bin, and Lynde Creek and the waterfront put some lots inside a conservation authority's regulated area. The work is in the basement and the house stays supported throughout, so most families stay; each section is dug, formed, poured and inspected before the next. Underpinning lowers a basement floor by extending the foundation walls down in short engineered sections, one at a time, so the house is never sitting on an unsupported wall. The result is legal ceiling height for a suite or a family room.

Basement underpinning · Whitby

Whitby, on the ground.

Whitby is a heritage downtown, a lakefront in Port Whitby, 1970s and 1980s subdivisions between them, and Brooklin's village core with new subdivisions around it. Those basements in Whitby were never meant to be lived under, and lowering the floor is what turns them into a suite or a real family room. The Whitby brief is usually a second storey on a 1980s house, a rear addition behind a downtown heritage house, or a custom home on a lakefront lot.

Read more about building in Whitby or the full basement underpinning page.

What is included

On the drawing.

01

A site walk with measurements of the existing ceiling height and a look at the footings

02

Engineered drawings with the underpinning sequence and the new footing depth

03

Building permit filed and followed by us

04

Excavation and pours in numbered sections, each inspected before the next

05

New slab, drainage, sump and waterproofing where the drawings call for them

06

A deficiency walk, and a written warranty

Permits in Whitby

Paper first.

Underpinning needs a building permit with engineered drawings, and each section is inspected before the next one is dug; a suite that follows needs its own permit. The Town of Whitby issues the permit, and heritage designation downtown adds a review to exterior work.

  • A building permit with engineered drawings is required in every GTA municipality.
  • Each underpinning section is inspected before the next one is dug.
  • On a semi, the drawings address the shared wall and the neighbour's foundation.
  • A suite that follows needs its own permit for the plumbing, the egress and the fire separation.

The paperwork wall: WSIB, insurance, licences, the HCRA status and the warranty, on one page and dated.

What sets the price in Whitby
DriverWhat we look at
How far the floor dropsEvery extra inch of depth is more excavation and a deeper footing.
Perimeter lengthThe number of underpinning sections is set by the wall length, and each one is dug, formed and poured on its own.
Soil and waterClay, sand and a high water table each change the sequence and the drainage.
Benching insteadWhere the soil or the neighbour's foundation rules out underpinning, benching lowers the floor with a ledge along the wall.
What followsA lowered basement is usually the start of a suite, and the plumbing and finishes come after the slab.

No price per linear foot on this site. The site walk and the engineer's drawings set the number.

Basement underpinning questions from Whitby

Usually. The site walk measures the ceiling height and checks the footings, and the engineer draws the sequence. the Town of Whitby issues the permit and inspects each section.

Usually, yes. The house is supported throughout and the work stays in the basement. Noise and dust are real, and the basement is out of use for the duration.

Most can. The engineer confirms the foundation from a test pit, and the subdivision lots have the room for a crane.

Yes, with a heritage review of anything visible from the street if the house is designated. Additions usually go to the rear and follow the house's character.

A Whitby basement underpinning starts with a site walk.

Start with a site walkSee the work